CUTTING TOOLS FOR HYDRAULIC HAMMERS
We offer tools for every kind of Hydraulic Hammer and every brand in the market.
Our choice of steel and heat treatments aim for the best combination of wear resistance and tenacity, in order to guarantee a longer lifetime of our hammer tools, even in the hardest work conditions. We manufacture tools of different types and shapes, suitable for every application.
TYPE OF STEEL
Our tools use a hardening steel with a nickel component that increases the thermal conductivity during the treatment, allowing to have a homogeneous hardness between the external surface and the heart of the tool.
At the time of purchase, the steel undergoes an initial ultrasound check to look for any internal anomalies. Surface imperfections are eliminated during the processing phase. In this stage, 6 mm up to 10 mm of material are removed depending on the diameters.
After processing, a dimension check is carried out just before the heat treatment.
The production cycle ends with the hardness check. Hardness must remain in a range between 48 RHC and 50 RHC (higher values increase the fragility of the tool and the chance of break and failure). The hardness check is carried out on every single tool we produce, with a single impression for lengths up to 800mm; and with two or three impressions for longer lengths.